Flexfoil CAD-CUT Premium Plus by STAHLS - 0.5 x 1m rolled
THIN AND ELASTIC FLEXFOIL WITH SOFT TEXTURE AND SILKY MATTE FINISH.
Polyurethane (PU) flexfoil, known for its high opacity and matte surface finish. Soft texture, perfect for large designs. Easy to cut and weed. Suitable for multi-color prints.
This flexfoil is suitable for:
- 100% cotton
- 100% polyester*
- 100% nylon*
- Polyester-cotton blends
- Spandex blends
- Satin
- Polyester mesh
* Must be tested before printing!
Cutting settings
Always test the cutting settings before production. Keep in mind that the settings may vary depending on the age of the blade. To ensure optimal processing of the material, please only plot logos with a minimum line thickness of 2 mm.
Printing instructions
- Temperature: 130° C / 150° C
- Time: 10 sec. / 5 sec.
- Pressure: Medium
- (#4-6 on Hotronix®)
- Carrier: Hot peel
Multi-color designs
First, print the background for 3-5 sec., then cold peel the carrier. Repeat for each additional color. Print the last color for 18-20 sec. and cold peel the carrier.
Care and storage instructions
Washable up to 60° C. Do not use fabric softener or bleach. Can be ironed directly. Always store the foil in a cool, dry environment. Avoid direct heat or sunlight.
